🇪🇺Continuing Airworthiness Regulation · Accountability

M.A.201 Responsibilities

In practice

M.A.201(a) puts legal responsibility for continuing airworthiness on the owner, and point (b) shifts it to the lessee only if the lessee is named on the registration document or the lease says so, which is why leases and management agreements must allocate this role expressly. For a privately operated business jet, point (g) requires the owner to have all continuing airworthiness tasks performed by an approved CAMO under a written contract following Appendix I; for commercial operations outside an airline licence point (f) puts the same duty on the operator, and an air carrier must hold the CAMO approval itself as part of its AOC under point (e).

#
(a)

The owner of the aircraft shall be responsible for the continuing airworthiness of aircraft and shall ensure that no flight takes place unless all of the following requirements are met:

(1) the aircraft is maintained in an airworthy condition;

(2) any operational and emergency equipment fitted is correctly installed and serviceable or clearly identified as unserviceable;

(3) the airworthiness certificate is valid;

(4) the maintenance of the aircraft is performed in accordance with the AMP specified in point M.A.302.

#
(b)

When the aircraft is leased, the responsibilities of the owner are transferred to the lessee if:

1. the lessee is stipulated on the registration document; or

2. detailed in the leasing contract.

#

When reference is made in this Part to the ‘owner’, the term owner covers the owner or the lessee, as applicable.

[…]
#
(e)

In the case of aircraft used by air carriers licensed in accordance with Regulation (EC) No 1008/2008 the operator shall be responsible for the continuing airworthiness of the aircraft it operates and shall:

(1) ensure that no flight takes place unless the conditions set out in point (a) are met;

(2) take the necessary steps to ensure its approval as a continuing airworthiness management organisation (‘CAMO’) pursuant to Annex Vc (Part-CAMO) or Subpart G of this Annex (Part-M), as part of air operator certificate for the aircraft it operates;

(3) take the necessary steps to ensure its approval in accordance with Annex II (Part-145) or conclude a written contract in accordance with point CAMO.A.315(c) of Annex Vc (Part-CAMO) or point M.A.708(c) of this Annex (Part-M) with an organisation which has been approved in accordance with Annex II (Part-145).

[…]
#
(f)

For complex motor-powered aircraft used for commercial specialised operations, for CAT operations other than those performed by air carriers licensed in accordance with Regulation (EC) No 1008/2008 or by commercial Approved Training Organisations (‘ATO’) and Declared Training Organisations (‘DTO’) referred to in Article 10a of Regulation (EU) No 1178/2011, the operator shall ensure that:

(1) no flight takes place unless the conditions set out in point (a) are met;

(2) the tasks associated with continuing airworthiness are performed by a CAMO approved in accordance with Annex Vc (Part-CAMO) or Subpart G of this Annex (Part-M); when the operator is not a CAMO approved in accordance with Annex Vc (Part-CAMO) or Subpart G of this Annex (Part-M), it shall conclude a written contract as regards the performance of those tasks in accordance with Appendix I to this Annex with an organisation approved in accordance with Annex Vc (Part-CAMO) or Subpart G of this Annex (Part-M);

(3) the CAMO referred to in point (2) is approved in accordance with Annex II (Part-145) as an organisation to qualify for the issue of an approval for the maintenance of aircraft and of components for installation thereon, or that CAMO has concluded a written contract in accordance with point CAMO.A.315(c) of Annex Vc (Part-CAMO) or point M.A.708(c) of this Annex (Part-M) with organisations approved in accordance with Annex II (Part-145).

#
(g)

For complex motor-powered aircraft not included in points (e) and (f), the owner shall ensure that:

(1) no flight takes place unless the conditions set out in point (a) are met;

(2) the tasks associated with continuing airworthiness are performed by a CAMO approved in accordance with Annex Vc (Part-CAMO) or Subpart G of this Annex (Part-M); when the owner is not a CAMO approved in accordance with Annex Vc (Part-CAMO) or Subpart G of this Annex (Part-M), it shall conclude a written contract as regards the performance of those tasks in accordance with Appendix I to this Annex with an organisation approved in accordance with Annex Vc (Part-CAMO) or Subpart G of this Annex (Part-M);

(3) the CAMO referred to in point (2) is approved in accordance with Annex II (Part-145) as an organisation to qualify for the issue of an approval for the maintenance of aircraft and of components for installation thereon, or that CAMO has concluded a written contract in accordance with point CAMO.A.315(c) of Annex Vc (Part-CAMO) or point M.A.708(c) of this Annex (Part-M) with organisations approved in accordance with Annex II (Part-145).

[…]

Cite as: “BCA Aviation Law Library, M.A.201 Continuing Airworthiness Regulation, bca-aviation.com/en/law-library”. Source: Publications Office of the EU (Cellar) / EUR-Lex · Consolidated text as of 7 August 2026.

How does this provision apply to your aircraft?

Tell us the register, the operator and the base. We turn the rule into a structure that holds.

Law library