🇪🇺ETS Monitoring & Reporting Regulation · Monitoring methodology

Article 53 Monitoring methodology for emissions from aviation activities

In practice

Emissions are calculated from fuel: the tonnes of each neat fuel consumed multiplied by its emission factor, with biofuel, RFNBO and other zero-rated fractions separated out for blended fuel. For the threshold tests (the small-emitter limits, the Directive's 1 000 and 10 000 tonne exclusions) paragraph 1a requires the preliminary emission factor, so sustainable aviation fuel uplift does not reduce the emissions figure used to decide whether an operator is in scope.

#
1.

Each aircraft operator shall determine the annual CO2 emissions from aviation activities by multiplying the annual consumption of each neat fuel (expressed in tonnes) by the respective emission factor.

For mixed aviation fuels, the aircraft operator shall determine the theoretical amount of each neat fuel from the total amount of that mixed aviation fuel and relevant composition data by applying the following:

(i) where a fuel contains biomass, the aircraft operator shall determine the biomass fraction in accordance with Article 54;

(ii) where a fuel contains an RFNBO, RCF or synthetic low-carbon fuel, the aircraft operator shall determine the RFNBO or RCF fraction or the synthetic low-carbon fraction in accordance with Article 54b;

(iii) where the RFNBO or RCF fraction or synthetic low-carbon fraction is not zero and where the aircraft operator wants to make use of zero-rating, the aircraft operator shall determine the zero-rated RFNBO or RCF fraction or the zero-rated synthetic low-carbon fraction in accordance with Article 54c;

(iv) where the zero-rated biomass fraction, the zero-rated RFNBO or RCF fraction or the zero-rated synthetic low-carbon fraction are not zero, the aircraft operator shall calculate the zero-rated fraction as the sum of zero-rated biomass fraction, zero-rated RFNBO or RCF fraction and zero-rated synthetic low-carbon fraction. The fossil fraction is the sum of all non-zero-rated fractions.

(v) the aircraft operator shall calculate the amount of each neat fuel as total amount of the mixed aviation fuel multiplied by the relevant fraction.

For the purpose of point (iv) of this paragraph, where the aircraft operator does not calculate the zero-rated fraction, the fossil fraction shall be 100 %.

#
1a.

By way of derogation from paragraph 1, for the purpose of assessing emissions thresholds set out in Articles 55(1) and 55(2) of this Regulation, in Article 28a(4) of Directive 2003/87/EC and in the entry ‘Aviation’ of the table in Annex I to Directive 2003/87/EC, the aircraft operator shall determine the CO2 emissions by multiplying the annual consumption of each fuel by its preliminary emissions factor.

[…]

Cite as: “BCA Aviation Law Library, Article 53 ETS Monitoring & Reporting Regulation, bca-aviation.com/en/law-library”. Source: EUR-Lex consolidated text (Publications Office Cellar) · Consolidated text as of 27 May 2025.

How does this provision apply to your aircraft?

Tell us the register, the operator and the base. We turn the rule into a structure that holds.

Law library